 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TLP599A TOSHIBA Photocoupler Photo Relay TLP599A Telecommunication Data Acquisition Measurement Instrumentation Unit in mm The TOSHIBA TLP599A consists of a gallium arsenide infrared emitting diode optically coupled to a photo-MOS FET in a six lead plastic DIP package (DIP6). The TLP599A is a bi-directional switch which can replace mechanical relays in many applications. * * * * * * * Peak off-state voltage: 60V (min.) On-state current: 300mA (max.) (A connection) On-state resistance: 2 (max.) (A connection) Insulation Thickness: 0.4 mm (max.) Isolation voltage: 2500Vrms (min.) UL recognized: UL1577, file no. E67349 Trigger LED current (Ta = 25C) TOSHIBA Weight: 0.4 g 11-7A8 Classification (Note 1) (IFT2) Standard Trigger LED Current (mA) @ION = 300mA Min. Max. 3/4 3/4 2 5 Marking Of Classification T2 T2, blank Pin Configuration (top view) 1 2 3 6 5 4 1. : Anode 2. : Cathode 3. : NC 4. : Drain D1 5. : Source 6. : Drain D2 (Note 1): Application type name for certification test, please use standard product type name, i.e. TLP599A (IFT2) : TLP599A Schematic 1 2 6 5 4 1 2002-09-25 TLP599A Maximum Ratings (Ta = 25C) Characteristic Forward current Forward current derating (Ta 25C) Peak forward current (100 s pulse, 100 pps) Reverse voltage Junction temperature Off-state output terminal voltage A connection Detecter On-state RMS current B connection C connection A connection On-state current derating (Ta 25C) Junction temperature Storage temperature range Operating temperature range Lead soldering temperature (10 s) Isolation voltage (AC, 1 min., R.H. 60%) (Note 2) B connection C connection Tj Tstg Topr Tsol BVS ION / C ION Symbol IF IF / C IFP VR Tj VOFF Rating 50 -0.5 1 5 125 60 300 450 600 -3 -4.5 -6 125 -55~125 -40~85 260 2500 C C C C Vrms mA / C mA Unit mA mA / C A V C V LED (Note 2) : Device considered a two-terminal device : Pins 1, 2 and 3 shorted together, and pins 4, 5 and 6 shorted together. Recommended Operating Conditions Characteristic Supply voltage Forward current On-state current Operating temperature Symbol VDD IF ION Topr Min. 3/4 7.5 3/4 -20 Typ. 3/4 15 3/4 3/4 Max. 48 25 300 80 Unit V mA mA C Circuit Connections 1 2 3 6 5 4 LOAD 1 2 3 6 5 4 LOAD 1 2 3 6 5 4 LOAD AC or DC DC DC A connection B connection C connection 2 2002-09-25 TLP599A Individual Electrical Characteristics (Ta = 25C) Characteristic Forward voltage LED Reverse current Capacitance Detector Off-state current Capacitance Symbol VF IR CT IOFF COFF Test Condition IF = 10 mA VR = 5 V V = 0, f = 1 MHz VOFF = 60 V V = 0, f = 1 MHz Min. 1.0 3/4 3/4 3/4 3/4 Typ. 1.15 3/4 30 3/4 3/4 Max. 1.3 10 3/4 1 3/4 Unit V A pF A pF Coupled Electrical Characteristics (Ta = 25C) Characteristic Trigger LED current A connection On-state Resistance B connection C connection RON Symbol IFT Test Condition ION = 300 mA ION = 300 mA,IF = 10 mA ION = 450 mA, IF = 10 mA ION = 600 mA, IF = 10 mA Min. 3/4 3/4 3/4 3/4 Typ. 1 1.4 0.7 0.35 Max. 5 2 1 0.5 Unit mA Isolation Characteristics (Ta = 25C) Characteristic Capacitance input to output Isolation resistance Symbol CS RS Test Condition VS = 0, f = 1 MHz VS = 500 V, R.H. 60% AC, 1 minute Isolation voltage BVS AC, 1 second (in oil) DC, 1 minute (in oil) Min. 3/4 5 10 10 Typ. 0.8 10 14 Max. 3/4 3/4 3/4 3/4 3/4 Unit pF Vrms Vdc 2500 3/4 3/4 3/4 5000 5000 Switching Characteristics (Ta = 25C) Characteristic Turn-on time Turn-off time Symbol ton toff Test Condition RL = 200, VDD = 20 V IF = 10 mA Min. 3/4 3/4 Typ. 3/4 3/4 Max. 2 2 Unit ms Switching Time Test Circuit IF VDD 1 2 4 VOUT ton 6 RL VOUT 10% toff 90% IF 3 2002-09-25 TLP599A IF- Ta 100 600 C connection ION (RMS)- Ta Allowable forward current IF (mA) 80 (mA) 500 B connection 60 On-state current ION (RMS) 400 A connection 300 40 20 200 100 0 -20 0 20 40 60 80 100 120 Ambient temperature Ta (C) 0 -20 0 20 40 60 80 100 Ambient temperature Ta (C) IFP - DR 5000 3000 Pulse width 100s Ta = 25C 100 50 Ta = 25C IF - VF Allowable pulse forward current IFP (mA) 500 300 IF (mA) Forward current 10 -3 3 10 -2 3 10 -1 3 10 0 1000 30 10 5 3 100 50 30 1 0.5 0.3 10 3 Duty cycle ratio DR 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Forward voltage VF (V) DVF / DTa - IF -2.8 1000 500 -2.4 IFP - VFP Forward voltage temperature Coefficient ,VF / ,Ta (mV / C) (mA) IFP Pulse forward current 300 -2.0 100 50 30 -1.6 -1.2 10 5 3 Pulse width 10s Repetitive Frequency = 100Hz Ta = 25C -0.8 -0.4 0.1 0.3 0.5 1 3 5 10 30 50 Forward current IF (mA) 1 0.6 1.0 1.4 1.8 2.2 2.6 3.0 Pulse forward voltage VFP (V) 4 2002-09-25 TLP599A RESTRICTIONS ON PRODUCT USE 000707EBC * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. * The products described in this document are subject to the foreign exchange and foreign trade laws. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 5 2002-09-25 |
Price & Availability of TLP599A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |